Skip to product information
1 of 20

miravesso

Alabaster Square Box Chandelier

Alabaster Square Box Chandelier

Regular price $1,782.00 USD
Regular price Sale price $1,782.00 USD
Sale Sold out
Shipping calculated at checkout.
Size
Finishes

Hand-Cut Alabaster Cubes · Black Brass Armature · Modular Architectural Chandelier

A modular cube chandelier in a contemporary architectural minimalist vocabulary — hand-cut alabaster cubes suspended on a slim black brass armature, lit from within by concealed G9 sockets so the natural veining of every cube reads luminous against the room. The fixture's geometric clarity reads as architecture more than as ornament.

Drawn from the modern architectural lighting tradition of natural-stone block fixtures. Suited to dining tables, kitchen islands, primary entry foyers, primary-suite seating areas, and great-room interiors in 5,000+ sq ft estates and luxury hotels — for design-led clients drawn to the modern alabaster vocabulary in transitional, neoclassical, and minimalist interiors. Available in four configurations from a 4-light linear bar to a 9-light grand square cluster.


Materials & Craft

Hand-Cut Alabaster Cubes

Each cube hand-cut from solid alabaster. Veining and translucency unique to every block — every fixture is one of one.

Black Brass Armature

Matte black powder-coated brass armature with brass detail accents at junction points — period-correct contemporary geometry.

Concealed G9 Backlight

G9 sockets concealed inside each alabaster cube, lighting the stone from within rather than from above.


Choose Your Configuration

4-Light Linear

L 39.4″ × W 4.7″ × H 13.8″

L 100 × W 12 × H 35 cm — for kitchen islands and long dining tables (60–84″)

6-Light Square

L 31.5″ × W 31.5″ × H 17.7″

L 80 × W 80 × H 45 cm — for square dining tables 48–66″ and primary foyers

8-Light Square

L 36.6″ × W 36.6″ × H 17.7″

L 93 × W 93 × H 45 cm — for square tables 60–80″ and large foyers

9-Light Grand Square

L 41.3″ × W 41.3″ × H 17.7″

L 105 × W 105 × H 45 cm — for square dining tables 72–96″ and two-story foyers

All configurations include 59″ / 150 cm hanging wire — adjustable on site.


Please Note — Natural Stone Variation

Hand-cut alabaster — every fixture is unique. Veining, translucency, and tone vary cube to cube; your fixture will not match the photos at the stone level.

Reinforced ceiling support recommended. 6/8/9-light configurations exceed standard junction-box load — your electrician should anchor to a joist or use a UL-listed fixture brace.


Product Notes

Form Modular cube chandelier · hand-cut alabaster cubes on slim black brass armature · linear or square configurations
Material Hand-cut solid alabaster cubes · matte black powder-coated brass armature with brass detail accents
Finish Natural alabaster with matte black brass armature (single standard finish)
Sizes Available 4-light linear · L 39.4″ × W 4.7″ × H 13.8″ (100 × 12 × 35 cm)
6-light square · L 31.5″ × W 31.5″ × H 17.7″ (80 × 80 × 45 cm)
8-light square · L 36.6″ × W 36.6″ × H 17.7″ (93 × 93 × 45 cm)
9-light grand square · L 41.3″ × W 41.3″ × H 17.7″ (105 × 105 × 45 cm)
Hanging Wire 59″ (150 cm) supplied · adjustable on site by your electrician
Light Source G9 bi-pin socket — bulbs not included · count varies by configuration (4, 6, 8, or 9)
Recommended Bulb G9 LED, 2700K warm white, ≤ 4W per bulb · clear or warm-tinted envelope reads best through alabaster · confirm correct G9 voltage for your region
Dimming Standard wiring is non-dimming · TRIAC-dimmable on request · Lutron-compatible
Voltage 110–120V US standard · 220–240V on request
Mounting Hardwired ceiling pendant via supplied canopy plate & wires
SKU RDC-142510
Best For Dining tables · kitchen islands · primary entry foyers · primary-suite seating areas · two-story foyer entries (9-light) · luxury hotel suites · contemporary, neoclassical, transitional, and minimalist interiors in 5,000+ sq ft estates
Trade & Project Designer specification packets, trade pricing, and project-quantity coordination available — contact our trade desk

Installation

  • Licensed electrician required. Hardwired ceiling pendant via supplied canopy plate and wires.
  • Specialist installer recommended — alabaster is a soft mineral; handle the cubes with care during un-crating, lift only by the brass armature.
  • Confirm ceiling support — for the 6, 8, and 9-light configurations, install a UL-listed fixture brace or anchor to a structural joist before mounting.
  • Hang the lower edge 30–34″ above the dining table or kitchen island, or 7 ft+ above the floor in walking zones.
  • Bulbs supplied by installer. G9 LED at 2700K — confirm correct G9 voltage for your region (US 110–120V or international 220–240V) before installing bulbs.
  • Care: dust the alabaster with a soft dry cloth only. Alabaster is porous — do not use water, glass cleaner, or any liquid.

Downloads


FAQ

Which configuration should I choose? +

The 4-light linear (L 39.4″) suits long kitchen islands and rectangular dining tables 60–84″ — the linear silhouette runs parallel to the table. The 6-light square (31.5″ sq) suits square dining tables 48–66″ and standard primary foyers. The 8-light square (36.6″ sq) suits square tables 60–80″ and large foyers. The 9-light grand square (41.3″ sq) is built for square dining tables 72–96″ and two-story foyer entries. Hang the lower edge 30–34″ above the table or island top.

What bulbs does it take? +

The fixture takes G9 bi-pin LED bulbs concealed inside each alabaster cube — count depends on configuration (4, 6, 8, or 9). We recommend G9 LED at 2700K warm white, ≤ 4W per bulb, with a clear or warm-tinted envelope that reads best through the alabaster. Confirm correct G9 voltage for your region — US installations need 110–120V G9; international markets need 220–240V G9. The wrong-voltage bulb will not work.

Will my fixture match the photographs? +

The brass armature and silhouette are made to consistent specification. The alabaster cubes, however, are hand-cut from natural blocks: veining patterns, exact tone, and translucency differ between every cube. The fixture you receive will sit within the same visual language as the photographs but will be visibly distinct at the stone level — the character of natural alabaster.

Is it dimmable? Lutron-compatible? +

Standard wiring is non-dimming. TRIAC-dimmable wiring is available as a custom build — please specify when contacting us. Compatible with Lutron Caséta, Diva, and forward-phase wall dimmers when paired with dimmable G9 LED bulbs.

How heavy is it and what ceiling support do I need? +

The 4-light linear is light enough for standard junction-box installation. The 6, 8, and 9-light square configurations are heavier and approach or exceed standard junction-box rating (≈ 25 kg / 55 lbs); your electrician should install a UL-listed heavy-duty fixture brace or anchor to a structural joist for these. Contact us for confirmed shipping weight before installation.

How do I clean the alabaster? Custom & trade? +

Dust with a soft dry microfiber cloth only. Do not use water, glass cleaner, ammonia, vinegar, or any liquid cleaner — alabaster is porous and water will discolor or stain. Custom builds: alternative armature finishes (polished brass, antique brass, blackened bronze) and longer wire drops available on request. Hospitality-grade construction suits luxury hotel suites and contemporary residential projects in 5,000+ sq ft estates. Contact our trade desk for project-quantity coordination.

View full details
  • Premium Quality Lighting

    Crafted for elegance, durability, and lasting performance

  • Customer-Centric Service

    Friendly, responsive support ensures a seamless shopping experience from browsing to delivery

  • Affordable Luxury

    High-end lighting solutions at prices that make premium design accessible to all