miravesso
Gloire Alabaster Chandelier
Gloire Alabaster Chandelier
Couldn't load pickup availability
Hand-Cut Alabaster Petals · Brass Armature · Three-Tier Pendant
A three-tier alabaster chandelier in a sculptural neoclassical vocabulary — overlapping hand-cut alabaster petals arranged in graduated tiers around a polished brass armature, descending from a brass canopy bell. Each petal is cut from solid alabaster with the natural rough edge preserved at the outer rim and the smooth face turned inward, lit from above so the natural cream-and-amber veining reads luminous through every petal.
Hand-cut alabaster panels and a chased brass armature; veining, edge profile, and translucency vary panel to panel. Suited to formal dining rooms, primary entry foyers, two-story foyers, primary-suite seating areas, and great-room interiors in 5,000+ sq ft estates and luxury hotels — for design-led clients drawn to the sculptural alabaster pendant vocabulary in transitional and neoclassical interiors.
Why This Fixture
Hand-Cut Solid Alabaster
Each petal cut from a solid alabaster block with the natural rough edge preserved at the outer rim. Veining and translucency are unique to every petal.
Three-Tier Composition
Graduated tiers of overlapping petals around a polished brass armature — reads as a single sculptural form rather than discrete pieces.
Polished Brass Armature
Chased and polished brass canopy, chain, and internal armature visible through the alabaster — period-correct metal for natural-stone lighting.
Finish
Polished Brass & White Alabaster
Hand-cut white alabaster with natural cream-and-amber veining; chased polished brass armature. Single standard finish — every fixture differs at the petal level.
Hand-cut alabaster — every piece is unique. Veining, edge profile, and translucency vary panel to panel; your fixture will not match the photos at the petal level.
Reinforced ceiling support recommended. Approx. 25–40 kg (55–90 lbs) assembled — your electrician should anchor to a joist or use a UL-listed fixture brace.
Product Notes
| Form | Three-tier alabaster pendant chandelier · graduated tiers of hand-cut alabaster petals on a polished brass armature |
| Material | Hand-cut solid alabaster panels · cast and polished brass armature, canopy & chain |
| Finish | Polished brass with white alabaster (single standard finish) |
| Dimensions | Ø 31.5″ × H 19.7″ (Ø 80 × 50 cm) |
| Hanging Chain | 12″ (30 cm) supplied · longer drop available on request |
| Light Source | E12 or E14 candelabra socket · bulbs not included |
| Recommended Bulb | E12/E14 clear candle LED, 2700K warm white, ≤ 25W incandescent equivalent · clear envelope reads best through alabaster |
| Dimming | Standard wiring is non-dimming · TRIAC-dimmable on request · Lutron-compatible |
| Voltage | 110–120V US standard · 220–240V on request |
| Mounting | Hardwired ceiling pendant via supplied canopy plate & chain |
| SKU | RDC-150210 |
| Best For | Formal dining rooms · primary and two-story foyer entries · primary-suite seating areas · great-room interiors in 5,000+ sq ft estates · luxury hotel suites and presidential suites · transitional, neoclassical, and contemporary interiors |
| Trade & Project | Designer specification packets, trade pricing, and project-quantity coordination available — contact our trade desk |
Installation
- Licensed electrician required. Hardwired ceiling pendant via supplied canopy plate and chain.
- Specialist installer recommended. Alabaster is a soft mineral — handle the petals with care during un-crating; lift only by the brass armature, never by individual petals.
- Hang the lower edge 30–34″ above the dining table, or 7 ft+ above the foyer floor in walking zones.
- Confirm ceiling support. 25–40 kg exceeds standard junction-box rating — UL-listed fixture brace or joist anchor required.
- Care: dust the alabaster with a soft dry cloth only. Do not use water, glass cleaner, or any liquid — alabaster is porous and will stain. For fingerprints use a dry chamois.
Downloads
Frequently Asked
What size dining table or room does it suit? +
The Ø 31.5″ shade suits dining tables 60–82″ long — typical of seating for 6 to 10. Chandelier diameter should sit between half and two-thirds of dining-table width. For primary foyers, the fixture suits 9–12 ft ceilings; for taller foyers and two-story drops, longer chain is available on request. Hang the lower edge 30–34″ above the dining table top measured from the finished surface.
How heavy is it and what ceiling support do I need? +
Approximately 25–40 kg (55–90 lbs) assembled — at or above standard residential junction-box rating. Your electrician should install a UL-listed heavy-duty fixture brace or anchor to a structural joist before mounting. Contact us for confirmed shipping weight before installation if structural review is needed.
Will my fixture match the photographs? +
The brass armature and silhouette are made to consistent specification — your fixture will read identically in form. The alabaster, however, is hand-cut from natural blocks: veining patterns, exact petal edge profile, translucency, and minor mineral inclusions differ between every panel. The fixture you receive will sit within the same visual language as the photographs but will be visibly distinct at the veining level — the character of natural alabaster.
What bulbs should I use? +
E12 or E14 candelabra-base bulbs (US E12 is the standard), supplied by your installer. We recommend clear-envelope candle LEDs at 2700K, ≤ 25W incandescent-equivalent. Clear glass reads best through alabaster — frosted bulbs flatten the natural glow and are not recommended. Bulb count is confirmed on the spec sheet.
Is it dimmable? Lutron-compatible? +
Standard wiring is non-dimming. TRIAC-dimmable wiring is available as a custom build — please specify when contacting us. Compatible with Lutron Caséta, Diva, and forward-phase wall dimmers when paired with dimmable LED bulbs. See our dimming protocols guide.
How do I clean the alabaster? +
Dust with a soft dry microfiber cloth only. Do not use water, glass cleaner, ammonia, vinegar, or any liquid cleaner — alabaster is porous and water will discolor or stain the surface. For fingerprints use a dry chamois. Keep the fixture away from high-humidity rooms (steam-shower baths, immediately above stovetops) to preserve the stone over time.
Quality You Can Rely On
-
Premium Quality Lighting
Crafted for elegance, durability, and lasting performance
-
Customer-Centric Service
Friendly, responsive support ensures a seamless shopping experience from browsing to delivery
-
Affordable Luxury
High-end lighting solutions at prices that make premium design accessible to all