Italian Marble · Opaline Glass · Mid-Century Form
A wall-mounted sculpture in two materials. An opaline glass globe rests against a slab of Italian marble — borrowed from the elegance of pearls on a silver tray, filtered through the vivid optimism of mid-century Italian design.
Each marble slab is prized for its bold grey veining. No two pieces arrive alike; each carries its own quiet signature, cut from stone that took centuries to form.
See It In Action
AC 110V Only · Do Not Use 12V
This fixture uses G4 bi-pin AC 110V bulbs — it is not compatible with low-voltage 12V G4 bulbs. Using a 12V bulb will cause immediate failure or damage the fixture.
When shopping for replacement bulbs, confirm the packaging reads G4 / 110V AC — the bi-pin base looks identical to the 12V version.
Configuration — Choose at Checkout
Single — 1 Head
D 12 × H 35 cm
∅ 4.7″ × H 13.7″
1.74 kg / 3.8 lbs
Double — 2 Heads
D 12 × H 44 cm
∅ 4.7″ × H 17.3″
2.3 kg / 5.1 lbs
Triple — 3 Heads
D 12 × H 60 cm
∅ 4.7″ × H 23.6″
3.5 kg / 7.7 lbs
Materials & Craft
◧
Marble
Italian marble with bold grey veining. Each piece uniquely patterned.
○
Opaline Glass
Hand-blown globe shade. Softens the light into a warm, diffused glow.
✦
G4 Socket · 110V
Bi-pin AC 110V base. Bulb sold separately — LED recommended.
Product Notes
G4 Bi-Pin Bulb not incl.
Horizontal or Vertical Flexible mounting
Hardwired Wall installation
| Dimensions |
1 Head: D 12 × H 35 cm / ∅ 4.7″ × H 13.7″
2 Heads: D 12 × H 44 cm / ∅ 4.7″ × H 17.3″
3 Heads: D 12 × H 60 cm / ∅ 4.7″ × H 23.6″ |
| Weight |
1 Head: 1.74 kg / 3.8 lbs
2 Heads: 2.3 kg / 5.1 lbs
3 Heads: 3.5 kg / 7.7 lbs |
| Body material |
Marble (Italian) |
| Shade material |
Opaline Glass |
| Color |
White |
| Socket |
G4 Bi-Pin Base |
| Voltage |
AC 110V only |
| Wiring |
Hardwired |
| Orientation |
Horizontal or Vertical |
| SKU |
RDW-172513 |
Installation
- Hardwired wall installation — licensed electrician recommended.
- Mounts horizontally or vertically — orient to suit your wall composition.
- Use only G4 AC 110V bi-pin bulbs. Do not substitute with 12V low-voltage bulbs.
- Marble is natural stone — handle carefully during installation to avoid chipping.
- For indoor use only. Not rated for bathrooms or damp locations.
FAQ
Why can't I use a 12V G4 bulb? +
The G4 bi-pin base is physically identical in 12V and 110V versions, but the electrical systems are different. This fixture is wired for direct 110V AC mains power — installing a 12V bulb will cause it to fail immediately or damage the fixture. Always confirm the bulb packaging reads G4 / 110V AC.
Which bulb do you recommend? +
A warm white (2700K) G4 AC 110V LED bulb at 2–3W gives the most flattering glow through the opaline shade. LED is strongly preferred — it runs cool, lasts longer, and won't heat-stress the marble or glass.
Can I mount it horizontally? +
Yes. The fixture is designed to work in either orientation — vertical (heads pointing up or down) or horizontal (heads pointing left or right). Choose whichever suits your wall composition.
Is the lamp dimmable? +
Yes, when paired with a dimmable G4 110V LED bulb and a compatible TRIAC dimmer switch. Confirm the bulb's dimmer compatibility list before installing.
Will the marble veining vary between units? +
Yes — significantly. Each marble back is cut from a single slab of natural Italian marble, so veining patterns, density of grey, and subtle tonal differences vary between every piece. No two are identical; this natural variation is the core character of the material.
What about the 1-head vs 2-head vs 3-head versions? +
All three share the same diameter (12 cm / 4.7″) and mounting footprint — they differ only in overall length. Pick the 1-head for tight spots (bedside, narrow hallway), 2-head for balanced bedroom or living-room use, and 3-head for a taller statement above a console or in a stairwell.
Downloads
