Antique Brass · Picture Frame · Gallery Wall Lamp
A slim antique brass frame that holds your chosen photo, print, or artwork — and lights it. The integrated lamp washes the piece in a warm, gallery-style glow, making any image feel curated. Swap the artwork as often as you like; the frame stays, the display changes.
See It In Action
Length — Choose at Checkout
Three lengths share the same 15.5 cm height and 15.5 cm wall projection — pick the length that best suits your artwork and wall space.
Materials & Craft
◉
Antique Brass
Solid brass body with a warm hand-finished antique patina.
❏
Picture Frame
Holds a photo, print, or artwork — swap pieces to refresh your space.
✦
Gallery Glow
Directional integrated light washes the artwork — quietly curated illumination.
Product Notes
E12 / E14 Socket (bulb not incl.)
3 Lengths Size options
Hardwired Wall installation
| Fixture dimensions |
Small: L 45 × H 15.5 cm / L 17.7″ × H 6.1″
Medium: L 58 × H 15.5 cm / L 22.8″ × H 6.1″
Large: L 76 × H 15.5 cm / L 29.9″ × H 6.1″ |
| Wall projection |
15.5 cm / 6.1″ — consistent across all sizes |
| Junction box size |
L 16 × H 7 cm / L 6.3″ × H 2.8″ |
| Body material |
Solid brass |
| Finish |
Antique brass |
| Socket type |
E12 or E14 candelabra |
| Bulb included |
No — sold separately |
| Mount type |
Wall-mounted · Hardwired · Horizontal orientation |
| SKU |
RDW-212218 |
Before You Install
Junction box requirement
The Pania mounts to a recessed wall junction box sized L 16 × H 7 cm / L 6.3″ × H 2.8″. This is slightly larger than a standard single-gang wall box.
If your existing wall box is a different size, your electrician can install a junction box adapter or a fresh recessed box before mounting. Please confirm this with your installer before ordering.
Installation
- Hardwired wall installation — a licensed electrician is recommended.
- Requires a recessed junction box sized L 16 × H 7 cm / L 6.3″ × H 2.8″. All mounting hardware is included.
- Designed for horizontal wall mounting — the frame is oriented landscape, with the integrated light running along the top edge.
- Artwork is inserted from the back via a removable backing panel — full detail in the installation guide.
- Suitable for indoor dry and damp locations. Not rated for wet/shower zones or exterior use.
FAQ
How do I insert or change the picture? +
The frame has a removable backing panel that allows you to slide artwork in and out from the back. The process is the same whether you're hanging the fixture for the first time or swapping prints later. The installation guide covers the exact steps.
What artwork size fits each length? +
The interior frame opening is slightly smaller than the external length. As a rough guide, your artwork should be approximately 3–5 cm shorter than the external length and around 10 cm tall. For precise sizing, refer to the spec sheet before ordering, or cut your print to fit.
What if my wall junction box is a different size? +
The Pania requires a recessed junction box of L 16 × H 7 cm / L 6.3″ × H 2.8″. If your existing box is smaller or a different shape, your electrician can install a larger recessed box or a junction-box adapter. Please confirm this step with your installer before ordering.
Which bulbs do you recommend? +
E12 or E14 candelabra-base LED bulbs in warm white (2700K), 3–4W each (≈40W incandescent equivalent). Longer sizes use more bulbs — the exact bulb count per variant is listed in the spec sheet.
Is this fixture dimmable? +
The fixture itself is compatible with dimming. Pair dimmable E12/E14 LED bulbs with a TRIAC-compatible dimmer switch (e.g. Lutron, Leviton Decora). Standard non-dimmable bulbs will run at full brightness only.
How do I care for the antique brass finish? +
Dust with a soft dry cloth. For fingerprints, a slightly damp microfiber cloth followed by thorough drying is fine. Avoid abrasive cleaners, harsh chemicals, and brass polishes — the antique patina is intentional, and polishing will remove it.
Downloads
