Floor-to-Ceiling Cable · Sliding Spot Head · No Drilling
A vertical lamp that runs from ceiling to floor on a single tension cable. The cone
spotlight head clamps onto the cable through friction — slide it up, slide it down, or
angle it sideways, and it stays exactly where you put it. No screws, no clips, no
bracketry; just the bend of the cable holding everything in place.
The cable runs from a small ceiling fixing to a weighted floor base, adjustable in
overall height from 200 cm to 350 cm. A piece of architectural minimalism that earns
its place anywhere a vertical accent of light is needed — corners, beside artwork, or
along a stairwell.
See It In Action
Features
Tension Cable Mount
Single cable runs from ceiling to a weighted floor base — no drilling into walls.
Friction-Lock Slider
The spotlight head bends the cable to lock its position — no screws, no clips.
Adjustable Height
Total height adjusts from 200 cm to 350 cm to suit different ceilings.
Color Options — Choose at Checkout
Black
Matte black — disappears against light walls, lets the geometry read as line drawing.
White
Powder-coated white — clean and minimal, blends with most interiors.
Red
Saturated red — a single graphic accent, modernist and punctuative.
Dimensions
∅ 10 cm / 3.9"Spot Head Diameter
200 – 350 cmAdjustable Height (78.7 – 137.8")
Plan for ceiling height. The cable system is engineered for ceilings
between approximately 2.0 m and 3.5 m (78.7" – 137.8"). Below 2.0 m the cable cannot
achieve sufficient tension; above 3.5 m, contact us about a custom-length cable before
ordering.
Specifications
SKU
RDP-175308
Materials
Metal cable and base · Aluminum spotlight head
Light Source
E26 / E27 socket · Bulb not included · User-replaceable
Recommended Bulb
LED E26/E27, max 25W · Warm white 3000K recommended · Compact globe or A19 shape
Color Temperature
Determined by your chosen bulb · Warm white 3000K recommended
Dimming
Compatible if a dimmable bulb and inline / wall dimmer are installed
Voltage
AC 110–240V · Universal
Adjustability
Spotlight head slides anywhere along the cable · Tilts horizontally
Mounting
Ceiling fixing + weighted floor base · No wall drilling required
The spotlight head clamps onto the tension cable through friction — when you bend the
cable into the head, the deflection holds it in place. Slide the head up or down the
cable to position the light wherever you need it. No screws or locking mechanisms; the
bend itself is the lock.
Will it fit my ceiling height? +
The cable adjusts from 200 cm to 350 cm (roughly 6.5 to 11.5 feet) of total height.
Standard 8 ft and 9 ft residential ceilings are well within range. For taller ceilings
(vaulted rooms, double-height spaces above 11.5 ft), contact us before ordering for a
custom-length cable.
Do I need to drill into the wall? +
No — installation only requires a small ceiling fixing point (similar to a pendant
light's junction box). The bottom of the cable is anchored by a weighted floor base,
so no wall drilling is needed.
What bulb does it take? +
One E26 (North America) or E27 (EU/UK/AU) standard-base bulb up to 25W. We recommend
a compact globe or A19-shape LED bulb in warm white (3000K). The spotlight head is
open at the front, so the bulb shape is partially visible — pick one that suits the
look. Bulb is not included.
